Jump to year -> [1964-08-01] [1964-11-01] [1964-12-01] [1965-01-01] [1966-07-01] [1976-09-01] [1977-01-01] [1978-04-01] [1981-11-01] [1984-03-01] [1987-06-01] [1988-04-01] [1990-01-01] [1993-01-01] [1994-07-01] [1994-09-01] [1996-02-01] [1998-02-01] [2002-01-01] [2003-06-24] [2004-01-01] [2015-01-01]
[Topic]: Fluid Mechanics Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

Number of files: 183

    1964-08-01---------Jump to [Top]
  1. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 8. NEGS-TT1-2-5-1964.pdf (7809 kb)
  2. Heat and Thermodynamics, Course 2-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Ugrad
    - Full course, sections 1 to 10. NEGS-TT2-2-5-1964.pdf (3387 kb)
  3. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. NEGS-TT3-2-5-1964.pdf (4826 kb)
    4. 1964-11-01---------Jump to [Top]
  4. Turbine, Generator and Auxiliaries, Course 3-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 9 NEGS-TT3-3-4-1964.pdf (6102 kb)
  5. Turbine, Generator and Auxiliaries, Course 4-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT4-3-4-1964.pdf (2375 kb)
    6. 1964-12-01---------Jump to [Top]
  6. Turbine, Generator and Auxiliaries, Course 2-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-12-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 10 NEGS-TT2-3-4-1964.pdf (7516 kb)
    7. 1965-01-01---------Jump to [Top]
  7. Turbine, Generator and Auxiliaries, Course 1-3.4, Nuclear Electric GS Technical Training Course, by Dick Dueck, OPG, 1965-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT1-3-4-1965.pdf (4837 kb)
    8. 1966-07-01---------Jump to [Top]
  8. Heat and Thermodynamics, Course 1A25, Nuclear Training Course , by George Howie, OPG, 1966-07-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. OH-1A25-1966.pdf (5569 kb)
    9. 1976-09-01---------Jump to [Top]
  9. Turbine, Generator and Auxiliaries, Course 134, Nuclear Training Centre, OPG, 1976-09-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051100.pdf (3779 kb)
    - 134.00-00 Index and Objectives 20051101.pdf (355 kb)
    - 134.00-01 Turbine Theory 20051102.pdf (793 kb)
    - 134.00-02 Turbine Operational Performance 20051103.pdf (534 kb)
    - 134.00-03 Turbine Operational Problems 20051104.pdf (554 kb)
    - 134.00-04 Turbine Start-Up 20051105.pdf (365 kb)
    - 134.00-05 Factors Limiting Startup and Rates of Loading 20051106.pdf (561 kb)
    - 134.00-06 Reliability and Testing Requirements 20051107.pdf (253 kb)
    - 134.00-07 Maintenance 20051108.pdf (404 kb)
    10. 1977-01-01---------Jump to [Top]
  10. Fluid Mechanics, Nuclear Training Course 223, January 1977, OPG, 1977-01-01. Doc type: Course.
    Summary: Basic fluid mechanics concepts (viscosity, friction, water hammer, pipe flow, lubrication).
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Course Objectives 20040300.pdf (82 kb)
    - Force - Momentum 20040306.pdf (90 kb)
    - Water Hammer 20040307.pdf (226 kb)
    11. 1978-04-01---------Jump to [Top]
  11. Fluid Mechanics, Nuclear Training Course 123, April 1978, OPG, 1978-04-01. Doc type: Course.
    Summary: Basic fluid mechanics concepts (viscosity, friction, water hammer, pipe flow, lubrication).  Note: Doc# 20040201 through to 20040205 are identical to OPG 223.00-1, rev January 1977 (see Doc# 20040301 through to 20040305
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Course Objectives 20040200.pdf (87 kb)
    - Parallel Pipe Flow 20040206.pdf (202 kb)
    - Compressible Flow 20040207.pdf (285 kb)
    - Water Hammer 20040208.pdf (265 kb)
    - Hydrodynamic Film Lubrication 20040209.pdf (562 kb)
  12. Fluid Mechanics, Nuclear Training Course 223, January 1977, OPG, 1978-04-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Viscosity 20040301.pdf (147 kb)
    - Reynolds' Number 20040302.pdf (105 kb)
    - Friction in Fluid Flow 20040303.pdf (301 kb)
    - Minor Losses 20040304.pdf (213 kb)
    - Pipe Flow Problems 20040305.pdf (132 kb)
    - Appendix 20040308.pdf (489 kb)
    13. 1981-11-01---------Jump to [Top]
  13. Heat and Thermodynamics, Course 125, Nuclear Training Centre, OPG, 1981-11-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050100.pdf (6328 kb)
    - Module B.7 Course Procedures 20050101.pdf (302 kb)
    - Module B.6 Basics 20050102.pdf (339 kb)
    - Module B.5 Steam Tables 20050103.pdf (740 kb)
    - Module B.4.2 Entropy, Throttling and Molier Diagram 20050104.pdf (904 kb)
    - Module B.4.1 Turbine With Reheat 20050105.pdf (684 kb)
    - Module B.3.2 Feedheater Operation 20050106.pdf (569 kb)
    - Module B.3.1 Condenser Performance 20050107.pdf (594 kb)
    - Module B.2 Steam Generator 20050108.pdf (477 kb)
    - Module B.1 Reactor 20050109.pdf (826 kb)
    - B.6 Self Evaluation 20050110.pdf (87 kb)
    - B.5 Self Evaluation 20050111.pdf (69 kb)
    - B.4.2 Self Evaluation 20050112.pdf (118 kb)
    - B.4.1 Self Evaluation 20050113.pdf (103 kb)
    - B.3.2 Self Evaluation 20050114.pdf (121 kb)
    - B.3.1 Self Evaluation 20050115.pdf (118 kb)
    - B.2 Self Evaluation 20050116.pdf (137 kb)
    - B.1 Self Evaluation 20050117.pdf (102 kb)
    - Criterion Tests 20050118.pdf (134 kb)
    14. 1984-03-01---------Jump to [Top]
  14. Heat and Thermodynamics, Course PI 25, Nuclear Training Centre, OPG, 1984-03-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: expansion and contraction, heat transfer, pressure control, Mollier diagrams, efficiency, the CANDU cycle.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050200.pdf (3028 kb)
    - 25-0 Introduction and Course Procedures 20050201.pdf (336 kb)
    - 25-1 Basics 20050202.pdf (471 kb)
    - 25-2 Expansion and Contraction 20050203.pdf (351 kb)
    - 25-3 Heat Transfer Calculations 20050204.pdf (183 kb)
    - 25-4 Pressure Control 20050205.pdf (200 kb)
    - 25-5 Mechanisms of Heat Transfer 20050206.pdf (144 kb)
    - 25-6 Mollier Diagrams and The Turbine Process 20050207.pdf (679 kb)
    - 25-7 Efficiency and The CANDU Cycle 20050208.pdf (298 kb)
    - 25-8 Criterion Tests 20050209.pdf (105 kb)
    - 25-9 Self Evaluation Answer Sheet 20050210.pdf (309 kb)
    15. 1987-06-01---------Jump to [Top]
  15. Nuclear Journal of Canada, 1987 Vol 1 No. 2, by M.B. Carver, R.A. Judd, J.e. Kiteley, and A. Tahir, CNS, 1987-06-01. Doc type: Paper.
    Summary: The ASSERT subchannel code has been developed specifically to model flow and phase distributions within CANDU fuel bundles. ASSERT uses a drift-flux model that permits the phases to have unequal velocities, and can thus model phase separation tendencies that may occur in horizontal flow. The basic principles of ASSERT are outlined, and computed results are compared against data from various experiments for validation purposes. The paper concludes with an example of the use of the code to predict critical heat flux in CANDU geometries.
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Fluid Mechanics [Phase] Design Analysis [Audience] Engineer Grad Ugrad
    - The Drift Flux Model in the ASSERTSubchannel Code NJC-1-2-08.pdf (742 kb)
    16. 1988-04-01---------Jump to [Top]
  16. Heat and Thermodynamics, Course 225, Nuclear Training Centre, OPG, 1988-04-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine with reheat, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20043100.pdf (4667 kb)
    - Index 20043101.pdf (208 kb)
    - Module 1 Basics 20043102.pdf (404 kb)
    - Module 2 Steam Tables 20043103.pdf (636 kb)
    - Module 3 Entropy, Throttling and Mollier Diagrams 20043104.pdf (701 kb)
    - Module 4 Turbine with Reheat 20043105.pdf (611 kb)
    - Module 5 Feedheater Operation 20043106.pdf (511 kb)
    - Module 6 Condenser Performance 20043107.pdf (546 kb)
    - Module 7 Steam Generator 20043108.pdf (382 kb)
    - Module 8 Reactor 20043109.pdf (710 kb)
    17. 1990-01-01---------Jump to [Top]
  17. Mechanical Equipment, Course PI 30.1, Nuclear Training Centre, OPG, 1990-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20043200.pdf (5736 kb)
    - PI 30.10-0 Introduction and Objectives 20043201.pdf (392 kb)
    - 430.10-0 Identification and Coding of Mechanical Equipment 20043202.pdf (251 kb)
    - 430.10-1 Centrifugal Pumps 20043203.pdf (379 kb)
    - 330.10-1 Centrifugal Pumps 20043204.pdf (795 kb)
    - 430.10-2 Positive Displacement Pumps 20043205.pdf (168 kb)
    - 430.10-3 Compressonrs - Dynamic and Positive Displacement 20043206.pdf (270 kb)
    - 430.10-4 Air System 20043207.pdf (82 kb)
    - 430.10-5 Fans 20043208.pdf (57 kb)
    - 430.10-6 Vacuum Pumps 20043209.pdf (185 kb)
    - 230.11-1 Compressors 20043210.pdf (226 kb)
    - 330.11-1 Heat Exchangers 20043211.pdf (218 kb)
    - 430.12-1 Piping and Tubes 20043212.pdf (271 kb)
    - 430.13-1 Valves 20043213.pdf (513 kb)
    - 430.14-1 Lubrification 20043214.pdf (143 kb)
    - 430.14-2 Unit 1 Bearings 20043215.pdf (68 kb)
    - 430.14-2 Unit 2 Lubrification Methods 20043216.pdf (62 kb)
    - 430.14-2 Unit 3 Bearing Design and Installation 20043217.pdf (81 kb)
    - 230.12-1 Lubrification 20043218.pdf (250 kb)
    - 430.15-1 Sealing Devices 20043219.pdf (181 kb)
    - 330.14-1 Axial Mechanical Seals 20043220.pdf (190 kb)
    - 230.13-1 Shaft Couplings 20043221.pdf (204 kb)
    - 230.13-2 Belt Drives 20043222.pdf (247 kb)
    - 230.13-3 Chain Drives 20043223.pdf (115 kb)
    - 230.13-4 Gears and Gearing 20043224.pdf (250 kb)
    - 230.16-1 Gas Turbines 20043225.pdf (289 kb)
  18. Turbine and Auxiliaries, Course PI 34 / TIMS Ref. PI 3004, Nuclear Training Centre, OPG, 1990-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051000.pdf (11938 kb)
    - PI 34.00-00 Index and Objectives 20051001.pdf (619 kb)
    - 334.00-01 The Steam Turbine 20051002.pdf (676 kb)
    - 234.00-01 Turbine Construction 20051003.pdf (1037 kb)
    - 334.00-03 The Steam System 20051004.pdf (517 kb)
    - 234.00-02 Steam Control to the Turbine 20051005.pdf (514 kb)
    - 334.00-07 The Condenser 20051006.pdf (476 kb)
    - PI 25-06 The Mollier Diagram and the Turbine Processes 20051007.pdf (1214 kb)
    - 334.00-08 Feedwater Heating System -1 20051008.pdf (212 kb)
    - 334.00-09 Feedwater Heating System -2 20051009.pdf (307 kb)
    - 234.00-07 Feedwater Control and Operation 20051010.pdf (586 kb)
    - PI 24.21-01 Secondary Heat Transport System - Impurities 20051011.pdf (230 kb)
    - PI 24.21-02 Chemical Additives and Blowdown 20051012.pdf (274 kb)
    - PI 25-07 Efficiency of the CANDU Turbine Cycle 20051013.pdf (513 kb)
    - 234.00-03 Steam Valve Hydraulic Control 20051014.pdf (255 kb)
    - 234.00-04 Governor Operation 20051015.pdf (516 kb)
    - 234.00-05 Turbine Governors 20051016.pdf (677 kb)
    - 334.00-10 The Lubricating Oil System 20051017.pdf (275 kb)
    - 334.00-11 The Turning Gear 20051018.pdf (113 kb)
    - 234.00-06 Turbine Operational Problems 20051019.pdf (568 kb)
    - 234.00-08 Factors Limiting Startup and Rates of Loading 20051020.pdf (887 kb)
    - 334.00-13 appendix 1 Ontario Hydro Nuclear Turbine Types 20051021.pdf (245 kb)
    19. 1993-01-01---------Jump to [Top]
  19. Principes de Science et de Fonctionnement des Réacteurs - Chaleur et Thermodynamique, CNSC, 1993-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Chaleur et Thermodynamique 20070900.pdf (850 kb)
    20. 1994-07-01---------Jump to [Top]
  20. Turbine and Auxiliaries, Nuclear Training Course 234, OPG, 1994-07-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 234-00 Introduction to the Course 20042400.pdf (182 kb)
    - Module 234-01 The Steam Turbine 20042401.pdf (760 kb)
    - Module 234-02 The Boiler 20042402.pdf (851 kb)
    - Module 234-03 The Main Steam System 20042403.pdf (1399 kb)
    - Module 234-04 Auxiliary Steam Systems 20042404.pdf (684 kb)
    - Module 234-05 The Condenser and its Auxiliary Systems 20042405.pdf (1091 kb)
    - Module 234-06 The Condensate, the Boiler Feed and Their Auxiliary Systems 20042406.pdf (1736 kb)
    - Module 234-07 The Turbine Governing System 20042407.pdf (724 kb)
    - Module 234-08 The Turbine Supervisory System 20042408.pdf (273 kb)
    - Module 234-09 The Turning Gear 20042409.pdf (305 kb)
    - Module 234-10 The Turbine Lubricating System 20042410.pdf (503 kb)
    - Module 234-11 Startup and Loading 20042411.pdf (1220 kb)
    - Module 234-12 Unloading and Shutdown 20042412.pdf (333 kb)
    - Module 234-13 Special Modes of Operation and Accidents 20042413.pdf (895 kb)
    - Module 234-14 Turbine Operational Problems 20042414.pdf (850 kb)
    21. 1994-09-01---------Jump to [Top]
  21. Mechanical Equipment, Course 23001, OPG, 1994-09-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 03200 Mechanical Engineering [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20042800.pdf (1261 kb)
    - Intro and Table of Contents 20042801.pdf (44 kb)
    - Module 1 Centrifugal Pumps and Systems 20042802.pdf (1034 kb)
    - Module 2 Positive Displacement Compressor Operation 20042803.pdf (194 kb)
    22. 1996-02-01---------Jump to [Top]
  22. Thermal Study of Nuclear Reactors, Course 2.2, by A. Tapucu, Chulalongkorn University, 1996-02-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Design Design Analysis [Audience] Engineer Grad Ugrad
    - Title and Table of Contents 20043801.pdf (96 kb)
    - Chapter 1 - Fundamental Concepts 20043802.pdf (234 kb)
    - Chapter 2 - Single Phase Fluid Equations 20043803.pdf (200 kb)
    - Chapter 3 - Principles of Heat Transfer 20043804.pdf (1061 kb)
    - Chapter 4 - Forced Convection Heat Transfer 20043805.pdf (1624 kb)
    - Chapter 7 - Heat Removal from Nuclear Reactors 20043806.pdf (1557 kb)
    - Appendix 1 - Tensors 20043807.pdf (49 kb)
    - Appendix 2 - Stress in a Fluid 20043808.pdf (256 kb)
    - Appendix 3 - A Short Summary of Orthogonal Functions Used in Chapter 4 20043809.pdf (178 kb)
    - Workbook, Chapter 4 20043810.pdf (2301 kb)
    - Workbook, Chapter 7 20043811.pdf (2043 kb)
  23. Reactor Thermalhydraulics Analysis, Course 2.3, by W.J. Garland, Chulalongkorn University, 1996-02-01. Doc type: Course.
    Summary: Fundamentals of thermalhydraulic analysis (heat transfer and fluid mechanics)of the heat transport system.
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] Engineer Grad Ugrad
    - Title and Table of Contents 20043901.pdf (144 kb)
    - Glossary and Foreword 20043902.pdf (152 kb)
    - Chapter 1 - Course Overview 20043903.pdf (140 kb)
    - Chapter 2 - Basic Equations for Thermalhydraulic Systems Analysis 20043904.pdf (561 kb)
    - Chapter 3 - Nodalization 20043905.pdf (303 kb)
    - Chapter 4 - Equation of State 20043906.pdf (338 kb)
    - Chapter 5 - The Rate Form of the Equation of State 20043907.pdf (512 kb)
    - Chapter 6 - Thermalhydraulic Network Simulation 20043908.pdf (343 kb)
    - Chapter 7 - Empirical Correlations 20043909.pdf (532 kb)
    - Chapter 8 - On Design Tools 20043910.pdf (481 kb)
    - Workbook, Chapter 1 20043911.pdf (151 kb)
    - Workbook Chapter, 2 20043912.pdf (767 kb)
    - Workbook Chapter 3 20043913.pdf (466 kb)
    - Workbook Chapter 4 20043914.pdf (604 kb)
    - Workbook Chapter 5 20043915.pdf (847 kb)
    - Workbook Chapter 6 20043916.pdf (614 kb)
    - Workbook Chapter 7 20043917.pdf (719 kb)
    - Workbook Chapter 8 20043918.pdf (903 kb)
    - Workbook Figures 20043919.pdf (509 kb)
    24. 1998-02-01---------Jump to [Top]
  24. Reactor Thermalhydraulics Analysis, Supplementary, Course 2.3a, by W.J. Garland, Chulalongkorn University, 1998-02-01. Doc type: Course.
    Summary: Supplementary info for thermalhydraulic analysis (heat transfer and fluid mechanics)of the heat transport system.
    Keywords: [Concept] Thermalhydraulics [SI] 33100 Main Heat Transport System [Discipline] Mechanical Engineering [Topic] Basic Equations Fluid Mechanics Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] Engineer Grad Ugrad
    - Appendices 1 - 4 1 - Time Derivatives 2 - The Reynolds Transport Theorem 3 - Rearrangement of Independent Variables 4 - Fast Calculation of Light-Water Properties 20044001.pdf (647 kb)
    - Calculation of Water Properties 20044002.pdf (947 kb)
    - THSIM User Manual 20044003.pdf (733 kb)
    - A Pedagogical Look at Fully- and Semi-Implicit Solutions to T-H Eq'ns 20044004.pdf (320 kb)
    - Basic Equations for T-H Systems Analysis 20044005.pdf (590 kb)
    - Miscellaneous Figures and Equations 20044006.pdf (315 kb)
    25. 2002-01-01---------Jump to [Top]
  25. Heat and Thermodynamics Course, CNSC, 2002-01-01. Doc type: Course.
    Summary: This module covers the following areas pertaining to thermodynamics: Introduction, Heat and Thermodynamics - The Basics, Reactor and Heat Transport System Normal Operation, Heat Transport System Component Operation
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Cover Page 20030900.pdf (83 kb)
    - 20030901.pdf (647 kb)
    - Presentation 20030902.pdf (1557 kb)
    26. 2003-06-24---------Jump to [Top]
  26. Fluid Mechanics, CNSC, 2003-06-24. Doc type: Course.
    Summary:
    Keywords: [Concept] Thermalhydraulics [SI] 31000 Reactor [Discipline] Mechanical Engineering [Topic] Fluid Mechanics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Presentation 20040602.pdf (610 kb)
    - 20040601.pdf (353 kb)
    - 20070300.pdf (336 kb)
    27. 2015-01-01---------Jump to [Top]
  27. The Essential CANDU, by Wm. J. Garland, Editor-in-Chief, UNENE, 2015-01-01. Doc type: Book.
    Summary: The Essential CANDU is a textbook about nuclear science and engineering pertaining to CANDU reactors using CANDU as the reference design. This distinguishes it from comparable textbooks based on PWR reactors. This is not a product description of CANDU per se. The book emphasizes theory over other aspects of nuclear science. This is a textbook about CANDU nuclear reactor and power plant engineering, not just the reactor physics of the core.
    Keywords: [Concept] General [SI] 30000 Reactor, Steam Generators and Auxiliaries 35000 Fuel Transfer and Storage 36000 Steam Generator Steam and Water Systems 37000 Fuel 40000 Turbine, Generator and Auxiliaries 60000 Instrumentation and Control [Discipline] Chemistry General Engineering Health Physics Nuclear Engineering [Topic] Corrosion Fluid Mechanics Fuel Management Heat Transfer Important Parameters Physical Description Process Systems Radiation Reactor Physics Safety Thermalhydraulics Thermodynamics Waste Handling [Phase] Design Design Analysis Design Description Design Evolution Safety Safety Analysis [Audience] Engineer Grad Ugrad
    - A textbook on the CANDU nuclear power plant technology. press_release-Jan2016.pdf (382 kb)
---end of page---